• Accept customized design requirements.
• Properties and applications meet the military and industry standards.
• 7'' touch screen display and intelligent software for easy and comfortable operation.
• Advanced rotary blowing design to prevent dust from backflflow.
• Automatic control the amount of dust/sand and wind to meet the standards of tests.
• Dynamic adjustment temperature control system: rapid and stable control of test chambers' temperature.
• Intelligent function: automatically add and recycle sand/dust.
• Independent control of temperature and humidity ensures a stable testing.
• Fashionable design of modular construction.
• Observation window in testing space with a dust wiper for real-time monitoring.
• Intelligent and independent protection design for overload, overheat, power supply abnormity, overvoltage,
component malfunction monitoring.
| Options Accessories: | Standard Version: |
| Independent sensors for protection (NE60519-2.1993) | 1 Stainless steel shelve |
| Entry ports for testing space | 1 Screen sieve |
| Power outlets for specimens | |
| Spare parts package | |
| E-management and cyber-software | |
| APP for mobility management | |
| Sand testing medium | |
| Dust testing medium | |
Structural mode:
The testing equipment adopts an integral structure with the working chamber as the main body. On the right
side of the test box, an electronic control cabinet is set up, and an electronic control device and an operation
panel device are built in. The back and bottom of the test box are equipped with an electromechanical cabin,
four sets of internal circulating fans and four sets of sand and dust vibrators. Installation of vacuum interface
device, sand heater, sample shelf, top-down circulating air inlet and outlet, double-door design for studio,
observation window on door, etc.
The dust circulation mode of the equipment can enter from the bottom of the equipment, and then from
both sides of the equipment into the inner box, which meets the IEC60068-2-68 dust test method. The
following is a schematic diagram of the standard.
The bilateral view of the equipment is shown in the following figure. The controller is located on the right
side of the equipment. There are two air outlet pipes under the rules behind it.
